<sub id="nppdt"><listing id="nppdt"><menuitem id="nppdt"></menuitem></listing></sub><form id="nppdt"></form>

      
      

              <form id="nppdt"><nobr id="nppdt"><th id="nppdt"></th></nobr></form>

                    全国咨询服务热线:400-6700-720 / 020-38937005

                    热门关键词: GELOY PC/ASA HRA222 Victrex PEEK 450CA30 cycoloy pc/abs-XCY620-BK1005

                    当前位置:主页 > 产品中心 > Cycoloy PC/ABS > CYCOLOY > PC/ABS >

                    Cycoloy PC/ABS C6600-111

                    2015-12-21 15:44

                    Cycoloy PC/ABS C6600物性

                    无溴无氯阻燃的PC + ABS合金,标准流动,耐水解.

                    Property
                     
                    TYPICAL PROPERTIES (1)
                    MECHANICAL
                    Value Unit Standard
                    Tensile Stress, yld, Type I, 50 mm/min
                    640
                    kgf/cm²
                    ASTM D 638
                    Tensile Stress, brk, Type I, 50 mm/min
                    490
                    kgf/cm²
                    ASTM D 638
                    Tensile Strain, yld, Type I, 50 mm/min
                    4
                    %
                    ASTM D 638
                    Tensile Strain, brk, Type I, 50 mm/min
                    80
                    %
                    ASTM D 638
                    Tensile Modulus, 50 mm/min
                    30500
                    kgf/cm²
                    ASTM D 638
                    Flexural Stress, yld, 1.3 mm/min, 50 mm span
                    950
                    kgf/cm²
                    ASTM D 790
                    Flexural Modulus, 1.3 mm/min, 50 mm span
                    26700
                    kgf/cm²
                    ASTM D 790
                    IMPACT
                    Value Unit Standard
                    Izod Impact, notched, 23°C
                    56
                    cm-kgf/cm
                    ASTM D 256
                    Instrumented Impact Total Energy, 23°C
                    520
                    cm-kgf
                    ASTM D 3763
                    Instrumented Impact Total Energy, -30°C
                    520
                    cm-kgf
                    ASTM D 3763
                    THERMAL
                    Value Unit Standard
                    Vicat Softening Temp, Rate B/50
                    99
                    °C
                    ASTM D 1525
                    HDT, 1.82 MPa, 3.2mm, unannealed
                    83
                    °C
                    ASTM D 648
                    HDT, 0.45 MPa, 6.4 mm, unannealed
                    98
                    °C
                    ASTM D 648
                    HDT, 1.82 MPa, 6.4 mm, unannealed
                    90
                    °C
                    ASTM D 648
                    Relative Temp Index, Elec
                    80
                    °C
                    UL 746B
                    Relative Temp Index, Mech w/impact
                    70
                    °C
                    UL 746B
                    Relative Temp Index, Mech w/o impact
                    80
                    °C
                    UL 746B
                    PHYSICAL
                    Value Unit Standard
                    Specific Gravity
                    1.19
                    -
                    ASTM D 792
                    Water Absorption, 24 hours
                    0.11
                    %
                    ASTM D 570
                    Mold Shrinkage, flow, 3.2 mm
                    0.4 - 0.6
                    %
                    SABIC Method
                    Melt Flow Rate, 260°C/2.16 kgf
                    21.5
                    g/10 min
                    ASTM D 1238
                    ELECTRICAL
                    Value Unit Standard
                    Volume Resistivity
                    >1.E+15
                    Ohm-cm
                    IEC 60093
                    Surface Resistivity, ROA
                    >1.E+15
                    Ohm
                    IEC 60093
                    Dielectric Strength, in oil, 3.2 mm
                    17
                    kV/mm
                    IEC 60243-1
                    Relative Permittivity, 50/60 Hz
                    2.7
                    -
                    IEC 60250
                    Relative Permittivity, 1 MHz
                    2.7
                    -
                    IEC 60250
                    Dissipation Factor, 50/60 Hz
                    0.004
                    -
                    IEC 60250
                    Dissipation Factor, 1 MHz
                    0.006
                    -
                    IEC 60250
                    FLAME CHARACTERISTICS
                    Value Unit Standard
                    UL Recognized, 94V-2 Flame Class Rating (3)
                    0.75
                    mm
                    UL 94
                    UL Recognized, 94V-0 Flame Class Rating (3)
                    1.5
                    mm
                    UL 94
                    UL Recognized, 94-5VB Rating (3)
                    2
                    mm
                    UL 94
                    Processing
                     
                    Parameter
                    Injection Molding
                    Value Unit
                    Drying Temperature
                    80 - 90
                    °C
                    Drying Time
                    3 - 4
                    hrs
                    Drying Time (Cumulative)
                    8
                    hrs
                    Maximum Moisture Content
                    0.04
                    %
                    Melt Temperature
                    245 - 275
                    °C
                    Nozzle Temperature
                    245 - 275
                    °C
                    Front - Zone 3 Temperature
                    245 - 275
                    °C
                    Middle - Zone 2 Temperature
                    220 - 275
                    °C
                    Rear - Zone 1 Temperature
                    220 - 255
                    °C
                    Mold Temperature
                    60 - 80
                    °C
                    Back Pressure
                    0.3 - 0.7
                    MPa
                    Screw Speed
                    40 - 70
                    rpm
                    Shot to Cylinder Size
                    30 - 80
                    %
                    Vent Depth
                    0.038 - 0.076
                    mm

                    与塑擎合作

                    您将会得到更成熟专业的工程塑料供应服务。我们以客户至上,同时也积极挑战,力求呈现最好的服务质量给广大客户。

                    工程塑料热线:

                    400-6700-720
                    020-38937005

                    关于塑擎:
                    OB欧宝体育