<sub id="nppdt"><listing id="nppdt"><menuitem id="nppdt"></menuitem></listing></sub><form id="nppdt"></form>

      
      

              <form id="nppdt"><nobr id="nppdt"><th id="nppdt"></th></nobr></form>

                    全国咨询服务热线:400-6700-720 / 020-38937005

                    热门关键词: GELOY PC/ASA HRA222 cycoloy pc/abs-XCY620-BK1005 Victrex PEEK 450CA30

                    当前位置:主页 > 产品中心 > Cycoloy PC/ABS > CYCOLOY > PC/ABS >

                    cycoloy pc/abs-CH6410-701

                    2015-12-16 14:59

                    Cycoloy PC/ABS CH6410-701

                    CH6410是高热量,冲击改良PC树脂.无溴无氯阻燃,有颜色限制.

                    Property
                     
                    TYPICAL PROPERTIES (1)
                    MECHANICAL
                    Value Unit Standard
                    Tensile Stress, yld, Type I, 50 mm/min
                    640
                    kgf/cm²
                    ASTM D 638
                    Tensile Stress, brk, Type I, 50 mm/min
                    550
                    kgf/cm²
                    ASTM D 638
                    Tensile Strain, yld, Type I, 50 mm/min
                    5.5
                    %
                    ASTM D 638
                    Tensile Strain, brk, Type I, 50 mm/min
                    88
                    %
                    ASTM D 638
                    Tensile Modulus, 50 mm/min
                    25900
                    kgf/cm²
                    ASTM D 638
                    Flexural Stress, yld, 1.3 mm/min, 50 mm span
                    970
                    kgf/cm²
                    ASTM D 790
                    Flexural Modulus, 1.3 mm/min, 50 mm span
                    26500
                    kgf/cm²
                    ASTM D 790
                    Tensile Stress, yield, 50 mm/min
                    63
                    MPa
                    ISO 527
                    Tensile Stress, break, 50 mm/min
                    55
                    MPa
                    ISO 527
                    Tensile Strain, yield, 50 mm/min
                    5
                    %
                    ISO 527
                    Tensile Strain, break, 50 mm/min
                    95
                    %
                    ISO 527
                    Tensile Modulus, 1 mm/min
                    2300
                    MPa
                    ISO 527
                    Flexural Stress, yield, 2 mm/min
                    90
                    MPa
                    ISO 178
                    Flexural Modulus, 2 mm/min
                    2400
                    MPa
                    ISO 178
                    Hardness, H358/30
                    100
                    MPa
                    ISO 2039-1
                    IMPACT
                    Value Unit Standard
                    Izod Impact, notched, 23°C
                    92
                    cm-kgf/cm
                    ASTM D 256
                    Instrumented Impact Total Energy, 23°C
                    740
                    cm-kgf
                    ASTM D 3763
                    Izod Impact, notched 80*10*4 +23°C
                    50
                    kJ/m²
                    ISO 180/1A
                    Izod Impact, notched 80*10*4 0°C
                    19
                    kJ/m²
                    ISO 180/1A
                    Izod Impact, notched 80*10*4 -30°C
                    15
                    kJ/m²
                    ISO 180/1A
                    Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm
                    55
                    kJ/m²
                    ISO 179/1eA
                    Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm
                    15
                    kJ/m²
                    ISO 179/1eA
                    THERMAL
                    Value Unit Standard
                    HDT, 0.45 MPa, 3.2 mm, unannealed
                    127
                    °C
                    ASTM D 648
                    HDT, 1.82 MPa, 3.2mm, unannealed
                    118
                    °C
                    ASTM D 648
                    CTE, -40°C to 40°C, flow
                    7.74E-05
                    1/°C
                    ASTM E 831
                    CTE, -40°C to 40°C, xflow
                    5.94E-05
                    1/°C
                    ASTM E 831
                    CTE, 23°C to 60°C, flow
                    7.E-05
                    1/°C
                    ISO 11359-2
                    CTE, 23°C to 60°C, xflow
                    7.E-05
                    1/°C
                    ISO 11359-2
                    Ball Pressure Test, 125°C +/- 2°C
                    PASSES
                    -
                    IEC 60695-10-2
                    Vicat Softening Temp, Rate B/50
                    134
                    °C
                    ISO 306
                    Vicat Softening Temp, Rate B/120
                    135
                    °C
                    ISO 306
                    HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
                    126
                    °C
                    ISO 75/Be
                    HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
                    113
                    °C
                    ISO 75/Ae
                    PHYSICAL
                    Value Unit Standard
                    Specific Gravity
                    1.19
                    -
                    ASTM D 792
                    Mold Shrinkage on Tensile Bar, flow (2)
                    0.05 - 0.07
                    %
                    SABIC Method
                    Mold Shrinkage, flow, 3.2 mm
                    0.4 - 0.5
                    %
                    SABIC Method
                    Melt Flow Rate, 260°C/2.16 kgf
                    6.3
                    g/10 min
                    ASTM D 1238
                    Density
                    1.2
                    g/cm³
                    ISO 1183
                    Melt Volume Rate, MVR at 260°C/5.0 kg
                    16
                    cm³/10 min
                    ISO 1133
                    ELECTRICAL
                    Value Unit Standard
                    Volume Resistivity
                    >1.E+15
                    Ohm-cm
                    IEC 60093
                    Surface Resistivity, ROA
                    >1.E+15
                    Ohm
                    IEC 60093
                    Dielectric Strength, in oil, 3.2 mm
                    18
                    kV/mm
                    IEC 60243-1
                    Relative Permittivity, 50/60 Hz
                    2.7
                    -
                    IEC 60250
                    Relative Permittivity, 1 MHz
                    2.7
                    -
                    IEC 60250
                    Dissipation Factor, 50/60 Hz
                    0.001
                    -
                    IEC 60250
                    Dissipation Factor, 1 MHz
                    0.01
                    -
                    IEC 60250
                    Comparative Tracking Index
                    225
                    V
                    IEC 60112
                    FLAME CHARACTERISTICS
                    Value Unit Standard
                    UL Recognized, 94V-1 Flame Class Rating (3)
                    0.99
                    mm
                    UL 94
                    UL Recognized, 94V-0 Flame Class Rating (3)
                    1.49
                    mm
                    UL 94
                     
                    Parameter
                    Injection Molding
                    Value Unit
                    Drying Temperature
                    90 - 100
                    °C
                    Drying Time
                    2 - 4
                    hrs
                    Drying Time (Cumulative)
                    8
                    hrs
                    Maximum Moisture Content
                    0.04
                    %
                    Melt Temperature
                    270 - 300
                    °C
                    Nozzle Temperature
                    265 - 300
                    °C
                    Front - Zone 3 Temperature
                    265 - 300
                    °C
                    Middle - Zone 2 Temperature
                    260 - 300
                    °C
                    Rear - Zone 1 Temperature
                    260 - 300
                    °C
                    Mold Temperature
                    60 - 90
                    °C
                    Back Pressure
                    0.3 - 0.7
                    MPa
                    Screw Speed
                    40 - 70
                    rpm
                    Shot to Cylinder Size
                    40 - 80
                    %
                    Vent Depth
                    0.038 - 0.076
                    mm

                    与塑擎合作

                    您将会得到更成熟专业的工程塑料供应服务。我们以客户至上,同时也积极挑战,力求呈现最好的服务质量给广大客户。

                    工程塑料热线:

                    400-6700-720
                    020-38937005

                    关于塑擎:
                    OB欧宝体育