<sub id="nppdt"><listing id="nppdt"><menuitem id="nppdt"></menuitem></listing></sub><form id="nppdt"></form>

      
      

              <form id="nppdt"><nobr id="nppdt"><th id="nppdt"></th></nobr></form>

                    全国咨询服务热线:400-6700-720 / 020-38937005

                    热门关键词: cycoloy pc/abs-XCY620-BK1005 GELOY PC/ASA HRA222 Victrex PEEK 450CA30

                    当前位置:主页 > 产品中心 > PC > LEXAN > pc-lexan >

                    Sabic Lexan PC EXL9330-BK1A068

                    2016-11-14 09:20

                    Lexan PC EXL9330物性

                    -60℃延展性,紫外稳定.耐燃性V-0/5VA. 非卤化,不含溴.

                    Property

                    TYPICAL PROPERTIES (1)
                    MECHANICAL
                    Value Unit Standard
                    Tensile Stress, yld, Type I, 50 mm/min
                    590
                    kgf/cm2
                    ASTM D 638
                    Tensile Stress, brk, Type I, 50 mm/min
                    620
                    kgf/cm2
                    ASTM D 638
                    Tensile Strain, yld, Type I, 50 mm/min
                    6
                    %
                    ASTM D 638
                    Tensile Strain, brk, Type I, 50 mm/min
                    130
                    %
                    ASTM D 638
                    Tensile Modulus, 50 mm/min
                    21400
                    kgf/cm2
                    ASTM D 638
                    Flexural Stress, yld, 1.3 mm/min, 50 mm span
                    900
                    kgf/cm2
                    ASTM D 790
                    Flexural Modulus, 1.3 mm/min, 50 mm span
                    21000
                    kgf/cm2
                    ASTM D 790
                    Tensile Stress, yield, 50 mm/min
                    55
                    MPa
                    ISO 527
                    Tensile Stress, break, 50 mm/min
                    60
                    MPa
                    ISO 527
                    Tensile Strain, yield, 50 mm/min
                    6
                    %
                    ISO 527
                    Tensile Strain, break, 50 mm/min
                    125
                    %
                    ISO 527
                    Tensile Modulus, 1 mm/min
                    2100
                    MPa
                    ISO 527
                    Flexural Stress, yield, 2 mm/min
                    85
                    MPa
                    ISO 178
                    Flexural Modulus, 2 mm/min
                    2200
                    MPa
                    ISO 178
                    Hardness, H358/30
                    90
                    MPa
                    ISO 2039-1
                    IMPACT
                    Value Unit Standard
                    Izod Impact, notched, 23°C
                    81
                    cm-kgf/cm
                    ASTM D 256
                    Izod Impact, notched, -30°C
                    69
                    cm-kgf/cm
                    ASTM D 256
                    Izod Impact, notched, -50°C
                    59
                    cm-kgf/cm
                    ASTM D 256
                    Izod Impact, notched, 23°C, 6.4mm
                    65
                    cm-kgf/cm
                    ASTM D 256
                    Izod Impact, double-gated, 23°C
                    108
                    cm-kgf/cm
                    SABIC Method
                    Instrumented Impact Total Energy, 23°C
                    539
                    cm-kgf
                    ASTM D 3763
                    Izod Impact, unnotched 80*10*3 +23°C
                    NB
                    kJ/m2
                    ISO 180/1U
                    Izod Impact, unnotched 80*10*3 -30°C
                    NB
                    kJ/m2
                    ISO 180/1U
                    Izod Impact, notched 80*10*3 +23°C
                    70
                    kJ/m2
                    ISO 180/1A
                    Izod Impact, notched 80*10*3 -30°C
                    55
                    kJ/m2
                    ISO 180/1A
                    Izod Impact, notched 63.5*12.7*3.2, 23°C
                    80
                    kJ/m2
                    ISO 180/4A
                    Izod Impact, notched 63.5*12.7*3.2, -30°C
                    65
                    kJ/m2
                    ISO 180/4A
                    Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm
                    75
                    kJ/m2
                    ISO 179/1eA
                    Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm
                    60
                    kJ/m2
                    ISO 179/1eA
                    Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm
                    NB
                    kJ/m2
                    ISO 179/1eU
                    Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm
                    NB
                    kJ/m2
                    ISO 179/1eU
                    THERMAL
                    Value Unit Standard
                    Vicat Softening Temp, Rate B/50
                    142
                    °C
                    ASTM D 1525
                    HDT, 0.45 MPa, 3.2 mm, unannealed
                    134
                    °C
                    ASTM D 648
                    HDT, 1.82 MPa, 3.2mm, unannealed
                    120
                    °C
                    ASTM D 648
                    HDT, 1.82 MPa, 6.4 mm, unannealed
                    124
                    °C
                    ASTM D 648
                    CTE, -40°C to 40°C, flow
                    6.66E-05
                    1/°C
                    ASTM E 831
                    CTE, -40°C to 40°C, xflow
                    6.66E-05
                    1/°C
                    ASTM E 831
                    CTE, 23°C to 80°C, flow
                    7.2E-05
                    1/°C
                    ISO 11359-2
                    CTE, 23°C to 80°C, xflow
                    7.7E-05
                    1/°C
                    ISO 11359-2
                    Ball Pressure Test, 125°C +/- 2°C
                    PASSES
                    -
                    IEC 60695-10-2
                    Vicat Softening Temp, Rate B/50
                    140
                    °C
                    ISO 306
                    Vicat Softening Temp, Rate B/120
                    142
                    °C
                    ISO 306
                    HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
                    135
                    °C
                    ISO 75/Be
                    HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
                    124
                    °C
                    ISO 75/Ae
                    Relative Temp Index, Elec
                    125
                    °C
                    UL 746B
                    Relative Temp Index, Mech w/impact
                    115
                    °C
                    UL 746B
                    Relative Temp Index, Mech w/o impact
                    120
                    °C
                    UL 746B
                    PHYSICAL
                    Value Unit Standard
                    Specific Gravity
                    1.18
                    -
                    ASTM D 792
                    Mold Shrinkage, flow, 3.2 mm
                    0.4 - 0.8
                    %
                    SABIC Method
                    Mold Shrinkage, xflow, 3.2 mm
                    0.4 - 0.8
                    %
                    SABIC Method
                    Melt Flow Rate, 300°C/1.2 kgf
                    10
                    g/10 min
                    ASTM D 1238
                    Density
                    1.19
                    g/cm2
                    ISO 1183
                    Water Absorption, (23°C/sat)
                    0.35
                    %
                    ISO 62
                    Moisture Absorption (23°C / 50% RH)
                    0.15
                    %
                    ISO 62
                    Melt Volume Rate, MVR at 300°C/1.2 kg
                    9
                    cm210 min
                    ISO 1133
                    ELECTRICAL
                    Value Unit Standard
                    Dielectric Strength, in oil, 3.2 mm
                    17
                    kV/mm
                    ASTM D 149
                    Relative Permittivity, 50/60 Hz
                    2.95
                    -
                    ASTM D 150
                    Relative Permittivity, 1 MHz
                    2.9
                    -
                    ASTM D 150
                    Dissipation Factor, 50/60 Hz
                    0.0024
                    -
                    ASTM D 150
                    Dissipation Factor, 1 MHz
                    0.0085
                    -
                    ASTM D 150
                    Hot Wire Ignition {PLC)
                    1
                    PLC Code
                    UL 746A
                    High Ampere Arc Ign, surface {PLC}
                    0
                    PLC Code
                    UL 746A
                    Comparative Tracking Index (UL) {PLC}
                    3
                    PLC Code
                    UL 746A
                    Volume Resistivity
                    >1.E+15
                    Ohm-cm
                    IEC 60093
                    Surface Resistivity, ROA
                    >1.E+15
                    Ohm
                    IEC 60093
                    Dielectric Strength, in oil, 3.2 mm
                    16
                    kV/mm
                    IEC 60243-1
                    Relative Permittivity, 50/60 Hz
                    2.6
                    -
                    IEC 60250
                    Relative Permittivity, 1 MHz
                    2.7
                    -
                    IEC 60250
                    Dissipation Factor, 50/60 Hz
                    0.001
                    -
                    IEC 60250
                    Dissipation Factor, 1 MHz
                    0.008
                    -
                    IEC 60250
                    Comparative Tracking Index
                    225
                    V
                    IEC 60112
                    FLAME CHARACTERISTICS
                    Value Unit Standard
                    UL Recognized, 94V-0 Flame Class Rating (3)
                    1.49
                    mm
                    UL 94
                    UL Recognized, 94-5VA Rating (3)
                    2.99
                    mm
                    UL 94
                    Glow Wire Flammability Index 960°C, passes at
                    1
                    mm
                    IEC 60695-2-12
                    Glow Wire Ignitability Temperature, 1.0 mm
                    825
                    °C
                    IEC 60695-2-13
                    Oxygen Index (LOI)
                    35
                    %
                    ISO 4589
                    UV-light, water exposure/immersion
                    F1
                    -
                    UL 746C

                    Processing

                    Parameter
                    Injection Molding
                    Value Unit
                    Drying Temperature
                    120
                    °C
                    Drying Time
                    3 - 4
                    hrs
                    Drying Time (Cumulative)
                    48
                    hrs
                    Maximum Moisture Content
                    0.02
                    %
                    Melt Temperature
                    295 - 315
                    °C
                    Nozzle Temperature
                    290 - 310
                    °C
                    Front - Zone 3 Temperature
                    295 - 315
                    °C
                    Middle - Zone 2 Temperature
                    280 - 305
                    °C
                    Rear - Zone 1 Temperature
                    215 - 295
                    °C
                    Mold Temperature
                    70 - 95
                    °C
                    Back Pressure
                    0.3 - 0.7
                    MPa
                    Screw Speed
                    40 - 70
                    rpm
                    Shot to Cylinder Size
                    40 - 60
                    %
                    Vent Depth
                    0.025 - 0.076
                    mm

                    与塑擎合作

                    您将会得到更成熟专业的工程塑料供应服务。我们以客户至上,同时也积极挑战,力求呈现最好的服务质量给广大客户。

                    工程塑料热线:

                    400-6700-720
                    020-38937005

                    关于塑擎:
                    OB欧宝体育